Honeywell DT-906 DUAL TEC Long Range Motion Sensor w/ Anti Masking

Description

Used.  May have slight dust/discoloration from previous install.  Was working when removed in May 2021.
Microcontroller-Based Dual Technology
Microwave and passive infrared (PIR) technologies, combined with microcontroller-based advanced signal processing, provide excellent detection while virtually eliminating false alarms and costly service calls.
Sensor Sabotage Prevention
The DT900 Series uses Active Infrared for anti-masking to detect attempts to mask the sensor. The patented look-down lens catches saboteurs who try to disable the unit from below, while three different tamper switches deter would-be criminals from physically damaging the sensor. The patented INFORMER® function, designed primarily as a diagnostic tool, monitors for sensor blockage and can help identify a sabotage situation.
Queue Logic Event Processing
The microcontroller in the DT900 converts all incoming microwave and PIR signals from analog-to-digital format. If the signal is determined to be valid it enters the Queue Logic Event Process. This process stores the valid signals within a moving window of time, keeping up to eight events for each signal type. Based on the First In First Out (FIFO) concept, Queue Logic requires a sophisticated on-board microcontroller to make advanced calculations for qualifying a sequence of events as an actual alarm.
Self-Test and Continuous
Supervision for High Reliability This industrial-grade sensor performs multiple levels of supervision. The INFORMER function checks each technology continuously. The microcontroller conducts a self-test of the sensor’s functions at regular intervals, and reports any trouble using the on-board trouble relay.
Designed for Harsh Environments
Vandal resistant housing combined with a zero clearance bug guard make the DT-900 series ideal for commercial and industrial applications such as warehouses, large retail facilities, manufacturing sites and schools.
Self-Adjusting Thresholds
The on-board microcontroller automatically adjusts the microwave and PIR thresholds to compensate for environmental disturbances not related to actual intrusion events. True temperature compensation continually optimizes the performance of the PIR to account for changes in room temperature. Environmental noise compensation keeps common environmental disturbances such as fluorescent lights from causing the microwave to false alarm.
Technology
– PIR for intrusion detection
– Microwave for intrusion detection
– Active infrared for anti-masking (DT900 and DT906)
Digital Fluorescent Light Filter
Digital filter virtually eliminates interference caused by fluorescent lighting.
Three Microcontroller-based Sensitivity Modes
Sensor sensitivity can be set to high for fastest capture, to normal, or to low for maximum false alarm immunity in harsh environments.
Sensitivity
Two to four steps within field-of-view, depending on sensitivity setting selected.
Zero Clearance Bug Guard
The bug guard provides zero clearance, protecting the pyro chamber from insects that can cause false alarms.
Small Animal Immunity
Immune to small animals commonly found in commercial conditions (birds, rodents, snakes).
Installer-Friendly Design
Designed with the installer in mind, the DT900 contains a large wiring space, protective clear plastic covers over the circuit boards to prevent damage, two end-of-line terminals, flashed over LEDs visible at great distance, a fast-install wall mounting plate for the included swivel mounting bracket and easy vertical and horizontal adjustment.
Mirror Optics For Long Range
The DT900 series utilizes custom designed mirror optics to provide effective capture at long range. Each model is easily selectable between two ranges.
LED Diagnostics
The LEDs will display codes to indicate an anti-masking condition, INFORMER condition, trouble condition, and recallable codes to indicate INFORMER results and whether or not there was a self-test failure.
Advanced Commercial/Industrial Features
In addition to anti-masking (DT900/DT906), the DT900 Series has command input for initiating a self-test remotely, has CENELEC two wire input options and has a remote LED enable input.
PIR Fields-of-View (Edges)
DT906/DT907
61m (200') Range
Long: 2
Intermediate long: 6
Intermediate: 4
Intermediate lower: 4
Lower: 8
Look-down: 2
37m (120') Range
Long: 6
Intermediate long: 4
Intermediate: 4
Lower: 8
Look-down: 2v